attenuation factor वाक्य
उदाहरण वाक्य
मोबाइल
- Most oscilloscopes allow for probe attenuation factors, displaying the effective sensitivity at the probe tip.
- Q is the anelastic attenuation factor or the seismic quality factor, a measure of the energy loss as the seismic wave moves.
- The lake basin analysis uses the volume of the lake and pollutant-specific attenuation factors to calculate a population of average-annual lake concentrations.
- For lower frequencies, the attenuation factors are much lower, the achievable heating depths are higher, and the temperature gradient within the tissue is lower.
- :: We're talking about'Q'anelastic attenuation factor ( or strictly its inverse ), the degree to which rocks absorb seismic energy.
- Eyewear is rated for optical density ( OD ), which is the base-10 logarithm of the attenuation factor by which the optical filter reduces beam power.
- This results in a . 1 ( 10X ) attenuation factor, but helps to isolate the capacitive load presented by the probe cable from the signal being measured.
- Since this cross-correlation is equal ( save for the K attenuation factor ), to the autocorrelation function of \ scriptstyle s _ { c'}, this is what we consider:
- In the case of non-birefringent materials, however, the 2? Jones matrix is the identity matrix ( multiplied by a scalar phase factor and attenuation factor ), implying no change in polarization during propagation.
- A superconductive Faraday cage would probably exclude the magnetic field right down to DC ( see the Meissner effect ), but non-superconductors must have a practical lower limit ( combined with an attenuation factor ).
- Some probe designs have additional pins surrounding the BNC or use a more complex connector than a BNC . These extra connections allow the probe to inform the oscilloscope of its attenuation factor ( 10? 100? other ).
- The two polarizations are mutually discriminated by a cross-polar-discrimination factor ( XPD, for more details see XPIC ) : at the receiving site, XPD is the attenuation factor of each polarized stream towards the cross-polarized one.
- Both the surface and atmospheric weights are dependent on the surface emissivity e _ S, the absorption coefficient \ kappa ( z ) and the earth incidence angle \ theta; the surface weight is the product of e _ S and an attenuation factor:
- In particular, if the frequencies are correct, but the phase is wrong, contribution from \ theta is a constant attenuation factor, also \ Delta \ omega \ cdot t represents a cyclic inversion of the recovered signal, which is a serious form of distortion.
- In this equation a _ 1 and a _ 2 are attenuation factors, E _ y is the luminance signal, ( E _ b-E _ y ) and ( E _ r-E _ y ) are the so-called color difference signals and \ omega is the angular frequency of the color carrier . \ omega is within the luminance bandwidth.
- Then from the first surface the maximum contribution is 0.5, for the reflection from the second : 0.5 * 0.5 = 0.25, the third : 0.25 * 0.5 = 0.125, the fourth : 0.125 * 0.5 = 0.0625, the fifth : 0.0625 * 0.5 = 0.03125, etc . In addition we might implement a distance attenuation factor such as 1 / D2, which would also decrease the intensity contribution.
attenuation factor sentences in Hindi. What are the example sentences for attenuation factor? attenuation factor English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.